Jewelry Argon Spot Welding Machine - Adjustable Pulse Sparkle Welder 500W
50A Soldering Machine Usage:
1. Before using the welding machine, check whether the power supply meets the operating voltage. Connect the screws of the corresponding polarity to the output wiring of the welding machine (the nut should be tightened when the output wire is connected to the output pole).
2. When working, use the clamp on the output black line to clamp the workpiece, close to the tungsten needle. The distance depends on the size and shape of the workpiece. Generally, the distance between the tungsten needle and the workpiece is between 0.5-1 mm. After setting the welding position, click When the foot switch is activated, a high-temperature arc is generated between the workpiece and the tungsten needle to instantly weld the workpiece.
3. The discharge end of the tungsten needle must be keep sharping before and during use to keep it in a good discharge state. In welding, the output pulse current can be changed according to the size of the workpiece, the size of the solder joint, and the process requirements to achieve the desired effect. When the potentiometer is turned clockwise (coarse adjustment, fine adjustment), the output pulse current increases, otherwise the output pulse current decreases.
For more information you can visit our offical website:
http://mao.ecer.com/test/jewellery-machine.com/supplier-4185045p2-jewelry-welding-machine
1. Before using the welding machine, check whether the power supply meets the operating voltage. Connect the screws of the corresponding polarity to the output wiring of the welding machine (the nut should be tightened when the output wire is connected to the output pole).
2. When working, use the clamp on the output black line to clamp the workpiece, close to the tungsten needle. The distance depends on the size and shape of the workpiece. Generally, the distance between the tungsten needle and the workpiece is between 0.5-1 mm. After setting the welding position, click When the foot switch is activated, a high-temperature arc is generated between the workpiece and the tungsten needle to instantly weld the workpiece.
3. The discharge end of the tungsten needle must be keep sharping before and during use to keep it in a good discharge state. In welding, the output pulse current can be changed according to the size of the workpiece, the size of the solder joint, and the process requirements to achieve the desired effect. When the potentiometer is turned clockwise (coarse adjustment, fine adjustment), the output pulse current increases, otherwise the output pulse current decreases.
For more information you can visit our offical website:
http://mao.ecer.com/test/jewellery-machine.com/supplier-4185045p2-jewelry-welding-machine
Jewelry Argon Spot Welding Machine
Adjustable Pulse Sparkle Welder 500W
-
500W Jewelry Welding Machine 110V/220V Pulse Argon Spot Welder
Contact Now -
Tooltos 80A Jewelry Pulse Spot Welder For Gold, Silver Welding Machine Tungsten Needle 1.5mm 50/60HZ 80A 500W Power
Contact Now -
Tooltos 150A Argon Pulse Intelligent Jewelry Spot Welding Machine For Precise And Durable Welds
Contact Now -
Tooltos 50A Argon Pulse Sparkle Jewelry Spot Welding Machine For Jewelry Profuction
Contact Now -
Tooltos 50A Blue Pulse Sparkle Jewelry Spot Welding Machine With 450W Power 0.6-1.2mm Welding Range
Contact Now
Related Videos
110V/220V 1-3kg Melting Furnace Jewelry Casting Machine Digital Vacuum Equipment
Other Videos
May 05, 2023
3KG Capacity Digital Vacuum Casting Machine Wax Injector Jewelry Casting Machine
Other Videos
May 05, 2023
100A HJ10-A Jewelry Spot Welding Machine Welding Equipment Jewelry Making Tools
Other Videos
May 17, 2023
